topic Re: r700 convert stand alone mode in Access Points - Indoor and Outdoor

r700 convert stand alone mode

hamit_erdagi — Wed, 29 May 2019 13:44:28 GMT

Hi, I want to buy 2 pieces 901-7982-ww00 model AP . They have a firmware to be used with controller. I want to use them stand alone. which version should i upgrade?

Re: r700 convert stand alone mode

jay_files — Wed, 29 May 2019 13:54:16 GMT

R700 solo firmware is here: https://support.ruckuswireless.com/products/60-zoneflex-r700#firmwares.

Re: r700 convert stand alone mode

jay_files — Wed, 29 May 2019 13:56:51 GMT

Oops, the part number you mentioned, 901-7982-ww00, is 7982, not R700.

The solo firmware for 7982 is here: https://support.ruckuswireless.com/products/38-zoneflex-7982#firmwares.

Re: r700 convert stand alone mode

michael_brado — Wed, 29 May 2019 16:29:20 GMT

But the ZoneFlex 7982 model AP has been End of Sale since Dec 31, 2016, so you will have to look for "used".

Please check the serial number of the APs with Ruckus support, BEFORE you buy them on a 2nd hand market,

to be sure they are NOT rejects that other customers have received a valid RMA replacement for.

Those APs were supposed to have been sent back or destroyed, and will NOT be replaced by Ruckus again, if you find problems.

Version 104.0.0.1347 is the last Solo AP image for zf7982 models, free to download* (with at least an email associated Guest account on Support).
https://support.ruckuswireless.com/software/1017-zoneflex-solo-access-point-104-0-0-0-1347-ga-softwa...