https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-want-to-deploy-a-stand-alone-ruckus-7762-AP-to-one-of-our/m-p/39645#M11245 Hi, i am an IT Support for a 5 star hotel currently using an extensive network of ruckus equipments. I wanted to deploy a stand alone ruckus 7762 AP to one of our external outlets without using a zone director. Is that possible and how? Thanks Tue, 09 Aug 2016 11:21:55 GMT steve_oliech 2016-08-09T11:21:55Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-want-to-deploy-a-stand-alone-ruckus-7762-AP-to-one-of-our/m-p/39645#M11245 Hi, i am an IT Support for a 5 star hotel currently using an extensive network of ruckus equipments. I wanted to deploy a stand alone ruckus 7762 AP to one of our external outlets without using a zone director. Is that possible and how? Thanks Tue, 09 Aug 2016 11:21:55 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-want-to-deploy-a-stand-alone-ruckus-7762-AP-to-one-of-our/m-p/39645#M11245 steve_oliech 2016-08-09T11:21:55Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-want-to-deploy-a-stand-alone-ruckus-7762-AP-to-one-of-our/m-p/39646#M11246 Before you connect the AP to your network, directly connect with a PC and give it a command to use a bogus ZD IP address, then it will never connect to your existing ZD network.<BR /><BR />rkscli:&nbsp; set director ip 1.1.1.1<BR />rkscli:&nbsp; reboot<BR /><BR />If you don't give it a static IP outside your DHCP scope (recommended) you will have to look up it's IP from MAC address in your lease table. Tue, 09 Aug 2016 17:16:49 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-want-to-deploy-a-stand-alone-ruckus-7762-AP-to-one-of-our/m-p/39646#M11246 michael_brado 2016-08-09T17:16:49Z