https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-have-2-x-R510-APs-I-attempted-an-upgrade-One-upgraded/m-p/38150#M10789 I have 2 x R510 APs, I attempted to upgraded them through the admin / Web login to Ver 200.5.10.0.291. One upgrade perfectly the other did not. It reverted its self to default and I cant get to it. It has renamed itself RuckusAP. It shows itself as disconnected in the interface and when I try to restore it tells me because I upgraded that the versions are a mismatch. is there a way to get to the AP or has it died. I have tried connecting it to a switch then hard setting a laptop to the switch, it wouldnt connect. I get green power light and a flashing CTL so I believe the unit is good. Any thoughts would be helpful Tue, 20 Nov 2018 23:19:26 GMT david_perkins_i 2018-11-20T23:19:26Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-have-2-x-R510-APs-I-attempted-an-upgrade-One-upgraded/m-p/38150#M10789 I have 2 x R510 APs, I attempted to upgraded them through the admin / Web login to Ver 200.5.10.0.291. One upgrade perfectly the other did not. It reverted its self to default and I cant get to it. It has renamed itself RuckusAP. It shows itself as disconnected in the interface and when I try to restore it tells me because I upgraded that the versions are a mismatch. is there a way to get to the AP or has it died. I have tried connecting it to a switch then hard setting a laptop to the switch, it wouldnt connect. I get green power light and a flashing CTL so I believe the unit is good. Any thoughts would be helpful Tue, 20 Nov 2018 23:19:26 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-have-2-x-R510-APs-I-attempted-an-upgrade-One-upgraded/m-p/38150#M10789 david_perkins_i 2018-11-20T23:19:26Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-have-2-x-R510-APs-I-attempted-an-upgrade-One-upgraded/m-p/38151#M10790 If you have DHCP and a def-gw on your LAN, try simply connecting to your network.The AP that has created the network on 200.6, should recognize the new AP andupgrade/configure it.  Tue, 20 Nov 2018 23:28:59 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/I-have-2-x-R510-APs-I-attempted-an-upgrade-One-upgraded/m-p/38151#M10790 michael_brado 2018-11-20T23:28:59Z