Config MAX power

rosa_mart_nez_m — Fri, 25 Aug 2017 10:16:27 GMT

It is possible to adjust the power of a specific AP to the maximum using cli?

Re: Config MAX power

abilash_p_r — Fri, 25 Aug 2017 13:33:39 GMT

Hi Rosa,

Command to adjust TX Power on the AP.

set txpower : set txpower  
                 -- Set transmit power

Command to verify the TX Power

get txpower : get txpower 
                 -- Get transmit power

Example:

rkscli: set txpower wlan0 2
OK

rkscli: get txpower wlan0
 wlan0 transmit power set to -2 dB from max power
OK

I hope this will help.

Regards,
Abilash PR