topic Re: R500 Unleashed - enable LAN port 1? in Access Points - Indoor and Outdoor

R500 Unleashed - enable LAN port 1?

derrick_macpher — Fri, 22 Oct 2021 18:14:06 GMT

I can't seem to find how I can enable LAN port 1 on my R500 running Unleashed 200.7.10.202.127

show ethinfo
System Ethernet Overview:
Port 0:
Interface= eth0
MAC Address= 94:bf:c4:25:xx:xx
Physical Link= up
Speed= 1000Mbps
Port 1:
Interface= eth1
MAC Address= 94:bf:c4:25:yy:yy
Physical Link= down
Speed= 1000Mbps

Forgive me for posting but I have searched around and can't seem to find the right google-fu for the search or it's not possible?

Re: R500 Unleashed - enable LAN port 1?

syamantakomer — Fri, 22 Oct 2021 21:22:07 GMT

Hi Derrick,

I don't think you have to manually enable the port on R500.

By default all the physical interfaces on our most of the 2x2:2 APs are enabled.

Connect a device and see if it works or not.

Command to check status on AP CLI is "get eth"

Re: R500 Unleashed - enable LAN port 1?

derrick_macpher — Fri, 22 Oct 2021 22:19:26 GMT

@syamantak_omer

Thank you for your reply. I haven't been able to get eth1 to detect a network connection so far.

get eth

Port Interface 802.1X Logical Link Physical Link Label
-----------------------------------------------------------------
0 eth0 None Up Up 1000Mbps full 10/100/1000 PoE
1 eth1 None Down Down 10/100/1000

Bought used of ebay... wonder if that's a bad port.

Re: R500 Unleashed - enable LAN port 1?

syamantakomer — Tue, 26 Oct 2021 23:45:54 GMT

@derrick_macpherson if it is from ebay, that is probably a bad port.