https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-stops-associating-users-via-2-4GHz/m-p/35744#M10108 Approximately once a day one of our R600 APs connected to ZD 1205 stops associating clients via 2.4 medium. 5GHz clients continue to work with no issues. All other APs work fine. <BR />Issue starts with 2.4 clients loose about 40-60% traffic on their interfaces (Windows, Linux etc.). When you try to reconnect, association doesn't pass.<BR />No RF pollution was noticed on 2.4GHz channel Wed, 15 Feb 2017 11:54:59 GMT wireless_admin 2017-02-15T11:54:59Z https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-stops-associating-users-via-2-4GHz/m-p/35744#M10108 Approximately once a day one of our R600 APs connected to ZD 1205 stops associating clients via 2.4 medium. 5GHz clients continue to work with no issues. All other APs work fine. <BR />Issue starts with 2.4 clients loose about 40-60% traffic on their interfaces (Windows, Linux etc.). When you try to reconnect, association doesn't pass.<BR />No RF pollution was noticed on 2.4GHz channel Wed, 15 Feb 2017 11:54:59 GMT https://community.ruckuswireless.com/t5/Access-Points-Indoor-and-Outdoor/R600-stops-associating-users-via-2-4GHz/m-p/35744#M10108 wireless_admin 2017-02-15T11:54:59Z