topic Re: How to enable 11ax mode in R730? in Access Points - Indoor and Outdoor

How to enable 11ax mode in R730?

sathish_kumar_k — Tue, 02 Apr 2019 10:28:20 GMT

Enabling 11ax mode shows "parameter error when setting mode to 11ax" in ZoneFlex Solo Access Point 108.2.0.0.837 (GA) Software Release (R730) 108.2.0.0.837, R730 AP.

Re: How to enable 11ax mode in R730?

michael_brado — Tue, 02 Apr 2019 21:43:48 GMT

Not sure, but do you have 802.3at PoE powering the AP?

Re: How to enable 11ax mode in R730?

sathish_kumar_k — Wed, 03 Apr 2019 07:38:58 GMT

Yes we are powering on using POE.

Re: How to enable 11ax mode in R730?

brian_powers — Wed, 03 Apr 2019 15:31:38 GMT

I think Michael was referring to the 802.3at POE specifically. As the original 802.3af standard will not provide enough power for it to function fully.

Re: How to enable 11ax mode in R730?

sathish_kumar_k — Thu, 04 Apr 2019 09:20:39 GMT

Thanks for pointing out Brian. I am not using at PoE. Could you please suggest me the best suitable 802.3at PoE for R730 available in market? we are looking for single port adapter.

Re: How to enable 11ax mode in R730?

brian_powers — Mon, 08 Apr 2019 12:20:00 GMT

Sathish,

Sorry, was traveling late last week. With POE being standardized, any power injector that states it supports the 802.3at standard should suffice. I typically prefer to power APs w/switches though as in my environment, it is simpler. So I do not have a good recommendation for a .3at power injector. Sorry.

Re: How to enable 11ax mode in R730?

sathish_kumar_k — Mon, 22 Apr 2019 12:38:54 GMT

Brian, i am observing same issue with Tenda TE-POE30G-AT Gigabit PoE Injector (White) also.

[ link removed by Administrator so post isn't seen as SPAM] (Google it yourselves)