The most recent content from our members.
My RUCKUS ICX 7150-C12P, originally installed in my Lennar home, suddenly stopped working. The switch has power but the SYST light is amber and the Ruckus R510 wireless AP has no power or lights on it. I also performed a hard reset by unplugging the power, holding the reset button, reconnecting the power while continuing…
Hello RUCKUS Lennar Home Community Support, I am a Lennar homeowner and the RUCKUS ICX-7150-C12P switch installed in my home suddenly stopped working. When I connect power, the LEDs briefly flash amber and then all LEDs turn off. The switch does not remain powered on and there is no network connectivity. I have completed…
Hi, Ruckus ICX 7150-C12P is not workin. There is no power supply to controller and access points. It appears like the unit is dead. I am checking if my devices are covered under warranty for replacement. Thank You Vinay
I have been in my lennar home since 2019. I recently started having issues where items in our home would lose connection for a few seconds and reconnect. I decided to upgrade my modem/router from a netgear c7000v2 to a netgear cm3000 modem and Flint2 router. Now I can see my network but when I connect to it, it is…
I recently did a factory reset on this switch. After performing to factory resets, and trying to access the web UI to manage to switch none of the default, passwords and usernames from the list works. I have tried all of the passwords several times from the list the entire list and I have reset the switch to factory…
hello! I have a ICX7150 in my Lennar home since 2017 and it recently stopped working. The connection stays for 6-8 minutes and then reboots, which repeated forever. I have tried multiple trouble shooting steps listed in other discussions and nothing has changed. I would like to request a of this device replacement through…
Hello, I have an ICX-7150-C12P, that has stopped working. When plugged, in all lights flash, for a second then all go away, and none come back on. I have unplugged and plugged into different outlets. Can this be warrantied?
1. Latest firmware version for icx 7150 c12p ? 2. From where would I download it?
Steps to setup Ruckus Unleashed using your Mobile: A) Connecting to the Access Point 1. On your device, open the list of available Wi-Fi networks. 2. Look for a network named “Configure.Me-1807D0”, where 1807D0 represents the last six digits of your Access Point’s MAC address. Note: This part of the name is unique to each…
How to perform Physical Factory Reset on a Ruckus Access Point Steps to perform Reset: A) Assigning and connecting Master AP 1. If you have multiple Access Points (APs) in your home, please locate the RUCKUS ICX-12P SWITCH in the network panel and temporarily disconnect the Ethernet cables for all APs except the one you're…
It looks like you're new here. Sign in or register to get started.