The most recent content from our members.
Hi, I have an ICX7250-48P (version SPR 8095m) that is exhibiting some strange behavior with RADIUS and I am unsure if it is my configuration or if this is how MAC Auth is expected to work on the ICX line. For reference, I have configured RADIUS before and am currently using another server for a few wireless access points…
Overview of Port Mirroring and Monitoring Port mirroring is an effective network traffic monitoring technique. It involves duplicating each packet entering or leaving a specific port on a network switch and sending this copy to another port for analysis. This technique is particularly useful for diagnostic and debugging…
When I run an AP Speed Test, I get a popup that says "Another test is in process. Please wait 5 seconds". I have tried waiting and rerunning but nothing happens. I am seeing this issue on multiple R650s and a H550. This was previously working on the latest 200.15 release.
Network Environment: * vSZ-H version : 6.1.2.0.404 * Windows Server 2016 Setup Procedure: This demo explains the configuration steps to authenticate wireless clients using 802.1x- SZ/vSZ by configuring NPs policy on a Windows server. 1-Make sure if the below features are installed. 2-Navigate to the Network Policy Server…
Hello, We have Ruckus ZoneDirector 3025, integration done with Windows NPS for radius authentication, it works. How can I configure the radius so that requests come from Access Points directly, not from ZoneDirector? Its possible on SmartZone, but I could not find where I can enable it on ZoneDirector.
QoS: Quality of Service, as the name implies, stands to improve the service of traffic in the network. More specifically: traffic that otherwise would be suppressed due to huge amounts of frames flowing through. This would generally be seen for VoIP traffic, audio streams, video streams: etc. Here, we'll look at 2 ways to…
I feel like this should be a pretty easy question, but I have been searching for a while now and I haven't found anything. I want to set one of my SSID's up so you have to authenticate to AD to join. I have a RADIUS server created, I just need a step by step guide that walks me through the whole process in terms of…
Default mapping explained with example for Admin logon using AAA in vSZ * Question- When should I use default mapping with SZ admin login using RADIUS and how does it work. * As we know that RADIUS Vendor-specific attribute "Ruckus-WSG-User" is used to map the AD user to a locally created admin-user on SZ and that AD user…
It looks like you're new here. Sign in or register to get started.