nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Recent Posts

The most recent content from our members.

Recent Posts

Unable to boot after power outage. Management port not responding. Ping failed; Is not Alive
Hello, Experienced a brief power outage today, 4/24, around 3:45 PM PDT. Since then the RUCKUS switch (ICX7150-C12P) has been unable to reboot. APs are also down without any lights. I attempted to perform a software recovery by following the instructions closely from the following post/URL: RUCKUS Forums - How to perform a…
Connection problem between R710 and T610
Hi, I have unleashed R710 and T610 APs. I want to do Mesh connection between them. What did i do yet: 1- Configured T610 as Master AP. - Mesh Option: ticked - Gateway Mode: ticked It created new SSID but PWR led was green blinking. I read some forums so as a result i configured Manual IP as 192.168.0.1 and gateway…

Welcome!

It looks like you're new here. Sign in or register to get started.