The most recent content from our members.
I have vSZ 7.2 Essentials and R550+R750. 2 zones: Default zone (WG: Default) and MyZone. All my SSID-s are in MyZone in WG=Default. Problem: 5 clients which are always in SSID=screens need to use only 2.4GHz. How to achieve this? I use WPA2/3 PSK in this SSID. The best option would be to restrict by device (by MAC for…
While setting up Layer 3/4 ACLs in Unleashed it seems that specific IP addresses or subnets in the Source and/or Destination field will make a rule getting ignored. In this case, the choosen default action (allow or deny) will be applied. The only way to have an ACL rule getting applied is when Source and Destination are…
Hello, I am using the R760 Access Point with the Standalone / Solo firmware. I have setup three SSID Wifi.IoT (2.4 GHz) Wifi.Performance (5 GHz Lower) Wifi.HighPerformance (5 GHz Higher) All the SSID have WPA2/3 Mixed. Unfortunately the 6E network on the 5Ghz Higher Band is not displayed. Neither on my 2025 iPhone Air nor…
Summary: In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google. Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x. * R350 (Access Point) Setup Procedure: * In the vSZ/SZ GUI, navigate to ‘Network ->…
Hey everyone, I work in a small compagny, I manage the network. There are 10 employees. I need to implement APs. I've done my homework, and I'm going to use lightweight APs with a controller. I don't know the brand yet, but a friend recommended RUCKUS. How do you choose the right type? I have 200m² to cover, but it's…
Summary: * In this article, we will look into the steps involved in setting up Self Registration Guest Pass Generation in Smart Zone controller running in 6.1 version Note: This feature is available since 6.1 version onwards Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version…
Network Environment: * vSZ-H version : 6.1.2.0.404 * Windows Server 2016 Setup Procedure: This demo explains the configuration steps to authenticate wireless clients using 802.1x- SZ/vSZ by configuring NPs policy on a Windows server. 1-Make sure if the below features are installed. 2-Navigate to the Network Policy Server…
As a Ruckus Technical Assistance Center (TAC) engineer, this knowledge article aims to provide guidance on assigning radio profiles to AP groups within the same venue in the RUCKUSOne platform. This specific tutorial addresses the scenario where a customer wishes to disable the 2.4GHz radio for a WLAN in one particular AP…
On Unleased AP, when we try to create the Guest SSID with Facebook login option, we get the below error when we click on "Register" "Register guest service [Facebook] to Facebook failed. Root Cause: This is due to Facebook has officially announced the discontinuation of the “Facebook Wi-Fi” feature, which took effect…
I am currently using (United States) DFS channels in the 5GHz spectrum due to congested airways. I have my syslog server set up to alert me when an AP detects DFS interference, but I notice that the 'Radar found' log only shows the primary (first) channel in the log entry. As an example, if I am using 80MHz widths (let's…
It looks like you're new here. Sign in or register to get started.