The most recent content from our members.
I have already opnned the support related firmware upgrade path, I have 2 switches within stacking port , Switch A ( master ) Switch B (slave), any suggestion good idea how to upgrade frimware without downtime ? all product ICX 7650 thks so much
Summary: In this community article, we will look at the steps involved in setting up Guest Portal authentication via Social Media Login, in this case via Facebook. Test Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.x. * R350 (Access Point) Setup Procedure: * In the vSZ/SZ…
Hello My ruckus icx 7150 c12p POE on all port does not work anymore. Checked on my switch and it still under warranty. How do i go about processing warranty exchange.
Summary: In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google. Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x. * R350 (Access Point) Setup Procedure: * In the vSZ/SZ GUI, navigate to ‘Network ->…
RuckusOne has introduced Single Sign-On feature for Administration. With this, we can make use of Azure AD credentials to login to RuckusOne wth SAML as the supported protocol. To Enable SSO for Administrative Access: Navigate to Administration >> Settings >> Click on "Setup" below "Enable SSO with 3rd Party provider" In…
I have several devices that are not able to get PoE from switches with model ICX7150-48ZP. However, when I connect these same devices to an ICX7550-24P They are able to draw power and work normally. These devices are B578 Edge Routers PN 201-104-P00-SB0, they are listed to be class 2 PoE devices, and I already tried…
Summary: * In this article, we will look into the steps involved in setting up Self Registration Guest Pass Generation in Smart Zone controller running in 6.1 version Note: This feature is available since 6.1 version onwards Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version…
Hi, about 6 months ago I purchased some R770s and installed them in my home with 10G POE via a Netgear MS510TXUP. While it’s been some time since I’ve owned them, I’ve finally gotten around to making an account to ask about the extremely loud high-pitched coil whine I hear when being around them (<20ft). Has anyone else…
Hey all, I wanted to take a moment to look at spanning tree. By default, ICX switches run 802.1d spanning tree on a per-vlan basis. Ideally, we want to use a protocol with faster convergence such as rapid spanning tree (802.1w). I will go through some general configuration steps and a few best practices. These…
Issue noticed: When a 3m DAC cable connection is made in 7150 between port 1/3/1 to 2/3/3 The link remains down, and the two switches will not stack with each other. Details from Ruckus optic guide: Link to Ruckus optic guide for reference: *…
It looks like you're new here. Sign in or register to get started.