nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Recent Posts

The most recent content from our members.

Recent Posts

Unable to boot after power outage. Management port not responding. Ping failed; Is not Alive
Hello, Experienced a brief power outage today, 4/24, around 3:45 PM PDT. Since then the RUCKUS switch (ICX7150-C12P) has been unable to reboot. APs are also down without any lights. I attempted to perform a software recovery by following the instructions closely from the following post/URL: RUCKUS Forums - How to perform a…
What is the minimum recommended crypto key setting?
I've configured "crypto key gen" which generates a 1024 DSA key but when I putty/ssh in, I get this warning: The first key-exchange algorithm supported by the server is diffie-hellman-group1-sha1, which is below the configured warning threshold. Should I go with "crypto key gen rsa 2048" or something similar? Thanks.
How to upgrade the RUCKUS ICX-7150-C12P Switch using TFTP Server Application
This article provides a step-by-step guide on upgrading a switch from a non-UFI version to the recommended 08.0.95g UFI version using a TFTP server and PuTTY Applications. Steps to upgrade: A) Initial version upgrade: When upgrading from a non-UFI version, we must first upgrade to the initial version (08.0.80f) before…

Welcome!

It looks like you're new here. Sign in or register to get started.