The most recent content from our members.
I have vSZ 7.2 Essentials and R550+R750. 2 zones: Default zone (WG: Default) and MyZone. All my SSID-s are in MyZone in WG=Default. Problem: 5 clients which are always in SSID=screens need to use only 2.4GHz. How to achieve this? I use WPA2/3 PSK in this SSID. The best option would be to restrict by device (by MAC for…
This is a reference on how to connect devices in the most common Lennar setups There must be a modem and a router to connect the ICX 7150-C12p, it must be plugged into one of the twelve ports (the middle ones). Note: It can be a 'modem' and 'router' or 'Modem router combo', it does not necessarily have to be 2 separate…
Steps to setup Ruckus Unleashed using your Mobile: A) Connecting to the Access Point 1. On your device, open the list of available Wi-Fi networks. 2. Look for a network named “Configure.Me-1807D0”, where 1807D0 represents the last six digits of your Access Point’s MAC address. Note: This part of the name is unique to each…
How to perform Physical Factory Reset on a Ruckus Access Point Steps to perform Reset: A) Assigning and connecting Master AP 1. If you have multiple Access Points (APs) in your home, please locate the RUCKUS ICX-12P SWITCH in the network panel and temporarily disconnect the Ethernet cables for all APs except the one you're…
1 ) Please go to: unleashed.ruckuswireless.com or use the IP address of the Master Access Point How to find my Ruckus “Devices IP address” using free applications /kb/articles/8-how-to-access-the-command-line-interface-cli-of-the-ruckus-icx-7150-c12p-switch Note: In the below example I am using the IP address '192.168.0.3'…
It looks like you're new here. Sign in or register to get started.