The most recent content from our members.
1: Type “CMD” from start button and open: 2: Run the Following command: "arp -a", now you can see the IP or internet address of the switch, and the physical address, however you need to know the physical address that can be located on a sticker in the Switch, so you can do the match with the information displayed in the…
Hey all, I wanted to take a moment to look at spanning tree. By default, ICX switches run 802.1d spanning tree on a per-vlan basis. Ideally, we want to use a protocol with faster convergence such as rapid spanning tree (802.1w). I will go through some general configuration steps and a few best practices. These…
Issue noticed: When a 3m DAC cable connection is made in 7150 between port 1/3/1 to 2/3/3 The link remains down, and the two switches will not stack with each other. Details from Ruckus optic guide: Link to Ruckus optic guide for reference: *…
When dealing with a corrupted flash or related issues, follow these steps to troubleshoot and resolve the problem. Boot Loop Process When a unit is stuck in a boot loop and fails to stabilize, the first step is to console into the unit directly and review the boot process. This can provide insights into why the unit is not…
This post has few important OID’s used for monitoring in common: Name : sysDescr OID : 1.3.6.1.2.1.1.1 Output / Value (OctetString): Ruckus Wireless, Inc. Stacking System ICX7750-48F, IronWare Version 08.0.90kT201 Compiled on Feb 22 2021 at 23:56:00 labeled as SWS08090k Name : sysObjectID OID : 1.3.6.1.2.1.1.2 Output /…
Hi Team, When a user goes through enrolment and gets a DPSK. When they then use that DPSK each device shows up as AccountDPSK-xxxxxx for the username: Since the user went through an enrollment, CloudPath knows the username and we can use a POLICY to return the username attribute. * Create a RADIUS Attribute Group that…
:: IP ADDRESS ASSIGNMENT IN 8200 DEVICES:: In 8200, The Switching image was deprecated with 10.0 and each platform will only use one image starting with 10.0. ALL the L3 image support L2 features starting with 10.0, Only routing image are available for all supported models. Switching features are still available in the…
Overview of Port Mirroring and Monitoring Port mirroring is an effective network traffic monitoring technique. It involves duplicating each packet entering or leaving a specific port on a network switch and sending this copy to another port for analysis. This technique is particularly useful for diagnostic and debugging…
Issue: Command “aaa authentication login privilege-mode” was removed in 9010 and 10.0.00 versions. This command was missing in certain 9010 and 10.0.0 versions. Below is the example the output looked like. ICX7850-48FS Router(config)#aaa authentication login default The default authentication list In the above output it is…
Here the switch model used is 7150 series and firmware running are 8095c. Run “show ip ssh config” to view all SSH details. Device#show ip ssh config SSH server : Enabled SSH port : tcp\22 Host Key : RSA 2048 Encryption : aes256-cbc, aes192-cbc, aes128-cbc, aes256-ctr, aes192-ctr, aes128-ctr, 3des-cbc Permit empty password…
It looks like you're new here. Sign in or register to get started.