The most recent content from our members.
R510 AP one of two is not working. PWR light on the front panel stays red after power cycling. Unleashed app shows the AP as offline. I have unplugged the POE and plugged it back in with no change. I have also tried holding the reset button for 45 seconds using a paper clip - PWR light continued to persist as red. I…
Hello, we are using R610 AP's running firmware version 6.1.0.0.1595 (using WPA2-AES for encryption). We frequently have devices with Intel AX201 chipsets having an issues where they connect to the AP but fail to get an address. This issue is tough to recreate but seems most common if the device has been "off" WiFi for an…
In this article, we will explain how to integrate Cloudpath with PingIdentity as the Identity Provider (IdP) for SAML Authentication. 1. Create the Workflow on Cloudpath and add the required Plug-Ins except the SAML authentication plug-in. We will add this plug-in after the configuration on PingIdentity (IdP) side and will…
Network Environment: * vSZ-H version : 6.1.2.0.404 * Windows Server 2016 Setup Procedure: This demo explains the configuration steps to authenticate wireless clients using 802.1x- SZ/vSZ by configuring NPs policy on a Windows server. 1-Make sure if the below features are installed. 2-Navigate to the Network Policy Server…
Hello RUCKUS Lennar Homeowners, Greetings from RUCKUS! We’re glad to have you here! To make your experience smoother, we’ve created the RUCKUS Lennar Knowledge Base, a dedicated self-help section with step-by-step guides, solutions to common issues, and troubleshooting resources for your RUCKUS devices. Before posting a…
It looks like you're new here. Sign in or register to get started.