The most recent content from our members.
Fresh deployment of vscg-7.2.0.0.243.ova on ESXi. Single node, no cluster planned. I only have one routable subnet available and I want the controller reachable on a single IP for management and API access. The setup wizard requires all three interfaces and rejects any configuration where they share a subnet. First it…
I am testing the virtual smart zone product to replace our legacy ZoneDirector3050. I will provide details below of testing. Subject: R600 AP unable to successfully join Virtual SmartZone 6.1.2 - ZD to SZ migration --- Environment --- Controller: Virtual SmartZone Essentials 6.1.2.0.1071 (KVM/Proxmox) Control Plane…
I have vSZ 7.2 Essentials and R550+R750. 2 zones: Default zone (WG: Default) and MyZone. All my SSID-s are in MyZone in WG=Default. Problem: 5 clients which are always in SSID=screens need to use only 2.4GHz. How to achieve this? I use WPA2/3 PSK in this SSID. The best option would be to restrict by device (by MAC for…
I have already opnned the support related firmware upgrade path, I have 2 switches within stacking port , Switch A ( master ) Switch B (slave), any suggestion good idea how to upgrade frimware without downtime ? all product ICX 7650 thks so much
Summary: In this community article, we will look at the steps involved in setting up Guest Portal authentication via Social Media Login, in this case via Facebook. Test Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.x. * R350 (Access Point) Setup Procedure: * In the vSZ/SZ…
Summary: In this article, I am going to explain the configuration steps of Social Login Guest Portal authentication with Google. Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version 6.1.1.0.x. * R350 (Access Point) Setup Procedure: * In the vSZ/SZ GUI, navigate to ‘Network ->…
RuckusOne has introduced Single Sign-On feature for Administration. With this, we can make use of Azure AD credentials to login to RuckusOne wth SAML as the supported protocol. To Enable SSO for Administrative Access: Navigate to Administration >> Settings >> Click on "Setup" below "Enable SSO with 3rd Party provider" In…
Summary: * In this article, we will look into the steps involved in setting up Self Registration Guest Pass Generation in Smart Zone controller running in 6.1 version Note: This feature is available since 6.1 version onwards Network Environment: * SmartZone/Virtual SmartZone [Essentials/High-Scale] (Controller), version…
Hey all, I wanted to take a moment to look at spanning tree. By default, ICX switches run 802.1d spanning tree on a per-vlan basis. Ideally, we want to use a protocol with faster convergence such as rapid spanning tree (802.1w). I will go through some general configuration steps and a few best practices. These…
Issue noticed: When a 3m DAC cable connection is made in 7150 between port 1/3/1 to 2/3/3 The link remains down, and the two switches will not stack with each other. Details from Ruckus optic guide: Link to Ruckus optic guide for reference: *…
It looks like you're new here. Sign in or register to get started.