The most recent content from our members.
Hi expert, I've been looking into the commands: -(config)#fast port-span -(config-if-e1000-1/1/1)#spanning-tree 802-1w admin-edge-port I'm not sure if applying both configurations on the edge ports is recommended. My network works with 802.1w and my switches are ICX8200 (FastIron 10).
ICX(config)# vrf client1 ICX(config-vrf-client1)# rd 7750:1 ICX(config-vrf-client1)# address-family ipv4 ICX(config-vrf-client1-af)# exit ICX(config)# vrf client2 ICX(config-vrf-client2)# rd 7750:2 ICX(config-vrf--client2)# address-family ipv4 ICX(config-vrf--client2-af)# exit ICX(config)# vrf client3…
Hi, I am configuring ACLs for IPv6, and it is not going as expected. There must be something I am missing as the logic, in my mind, is making sense but it is not working. I have VE 10 (Vlan 10) connected to ISP (internet), VE 20 (Vlan 20), VE 30 (Vlan 30). I want to allow Vlan 20 to access the internet. I only added rules…
Hello, For new installations we are moving to ICX8200 from 7150. In doing so, I have discovered our SSH ACL does not translate: Before (ICX7150): ssh access-group MyFavoriteACL I cannot find an equivalent command for ICX8200 (FastIron 10). And I don't see anything in the SSH sections of the management guide. CLI does show…
It looks like you're new here. Sign in or register to get started.