The most recent content from our members.
Continuing this issue I am reposting the issue posted by someone as i dont get proper reply in comments. https://community.ruckuswireless.com/t5/ICX-Switches/DHCP-server-icx-7750/m-p/101495#M7109 SW version is 08.0.95pT203 I have created 2 VLANS. For example vlan 100 and vlan 101 For vlan 100 I have used the dhcp pool…
This provides a concise summary of the Unleashed network's operation, outlining essential requirements and handy commands for configuration. Unleashed Overview In an Unleashed network, a RUCKUS Unleashed 'Master' Access Point acts similarly to a controller, managing all control functions. These settings are then propagated…
Hello. I got a few questions. I got a T610 AP from my friend and I cannot acces it. When i plug it in POE it gets ip adress from DHCP (169.254.62.226). I cannot acces it at all. My configure.me (xxx) is locked and the password is S/N from AP. When I connect nothing happens. Probably the AP was somewhere before configured.…
Hello All, In this article, I will explains an issue with customer DHCP configuration (related to DNS Domain name) which can potentially cause AP connectivity issue with RUCKUS Cloud. Symptoms * If you hit this issue, AP may show online but as soon as you make any configuration changes on venue, AP, WLAN, it will result AP…
I have R350, R550 and R650 APs. We're using WPA2. We are having problems with apple devices, they connect to the WiFi and loses the internet when they goes to sleep (without disconnecting from the WiFi). I have to disable and enable WiFi on the device to get internet again. It is not a problem of coverage or interference…
Dear Valued Customers, This communication is intended for our Partners/Customers who rely on Device Registrar Service (DRS) to onboard devices (AP/Switch) onto Smart Zone Controller. Please be aware of an upcoming change to the Device Registrar Service (DRS) Public Certificate Issuer. The Public Certificate Issuer is…
To ensure proper communication between the APs and switches with RUCKUS One, customers must allow some FQDNs and Ports in their Firewall. Customer Environment APs and Switches deployed behind a firewall and inbound/outbound traffic needs to be allowed for successful communication between RUCKUS network devices and RUCKUS…
I recently purhcased a ruckus R770. Very basically I've tried to follow the AP Setup guide on the ruckus website but haven't been able to complete it. I'm using a POE Injector ( TRENDnet TPE-319GI capable of POE++ and 10G) and new 1ft cat 6a cables. First set up I tried. AP -> POE Port on injector, Laptop -> POE Data Port.…
POE devices resetting on some ports APs are working fine with power-by-class 1, however, if the Poe device needs more power, it will reset and will trigger this PD overload log. show inline power emesg Show log Show inline power According with this document…
Hello All, In this article we are going to share information about ports, which should be open on firewall for RUCKUS Access Points, Switches and other services/server to v/SmartZone communication. For each major release port requirement may differ, so it is advised to refer the Administrator guide of respective release.…
It looks like you're new here. Sign in or register to get started.