The most recent content from our members.
The unleashed app is not working on an iPhone. I use to be able to access everything through the app but now all I get is “you are not connected to the unleashed network. Go to settings?” Notification message. I’ve tried to also log in online and same thing it will not let me log in and keeps saying my username or password…
Hi Ruckus. I tried to authenticate wispr using Ruckus cloud wispr page. A form for POST is below. document.write('<form method=POST action="https://' + get_sip() + ':443/SubscriberPortal/hotspotlogin">'); But it is not working. How do I configure wispr page like SZ or RC style? Regards.
If I add a license in auth.wireless.ruckus, will it get added into asia.ruckus.cloud or ruckus.cloud? It is pretty confusing because I can control both of them. For ruckus cloud, APs can be in standalone mode ?
During wireless usage, client access is slow, and testing has found that the client's ping packets have dropped severely with high latency. How can this situation be resolved on AC?
Hello everyone. Thank you for all your help. I have been experiencing the following symptoms for several weeks. When I check the traffic information on the APs registered with vSZ-H, there are times when the values for traffic and number of connections are missing, as shown in the attached image. As far as we have…
Hello - Can you confirm that I have upgraded my switch to the best and latest version possible? I have followed all of your steps and want to make sure that I have upgraded the switch properly so that I can avoid future issues as the switch registers as a "router" vs a switch every few months and I hate it. Can you also…
We are having a problem disconnecting the T310C with the ruckus cloud , the error disconnected from cloud appears. I don't find a solution to the problem.
Hi, I am migrating our wifi network from on-premise ZoneDirector to Ruckus Cloud. I successfully set up a EAP wifi network with AAA (freeradius+ldap). We also had a non-EAP network with captive portal becaude some users have problems with EAP (like incompatible devices). I don't see how to implement a wifi network with…
Hi... Can the t750se signal be extended beyond default signal strength thru an external antenna?
I am trying to add a new R510 AP to a ZD1200 and cannot get it to see VLAN 2. The current APls that are on there and configured and working show VLAN 2 under their info page. (They are T300 and R500). The ZD1200 sees the new R510 AP and says it is connected and has an IP of 10.34.14.74 The switch port for the new ap are…
It looks like you're new here. Sign in or register to get started.