nav[aria-label="Primary Navigation"] { padding: 0; & ul { list-style: none; width: 100%; display: flex; flex-direction: row; justify-content: start; align-items: start; gap: 30px; padding: 0; & li { margin: 0; } & ul li { list-style: none; } } }

Router stopped working

robinparky

Router stopped working. I tried hard reset already.

Find more posts tagged with

Accepted answers

All comments

Jayavidhya

Hi @robinparky

Please describe more details of the issue, in order to provide the best troubleshooting steps.

Please read the following guide for the basic understanding of the setup.

Most common Setups for Lennar homes users

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/Most-common-Setups-for-Lenna...

Ruckus at Home: Introduction(Tutorial video)

https://www.youtube.com/watch?v=vFD_ByQWGH0

Best regards,

Jayavidhya

Lennar Home Community

robinparky

I have ICX 7150-C12P switch. All of sudden the internet stopped working. I tried different switch, it works. So something wrong with the switch. I tired power off and on multiple times but no difference. I didn’t try hard reset because I am afraid that the configuration with my two access points can be wiped out. Please advice.

robin

Vásquez_Fer

Hi @robinparky

Hope you are doing well

1-On your switch ( faulty ) while it's plugged into the outlet, do you see any lights on? (Amber or green) Please let us know which lights are on?

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-973C8AE8-837A-41C7-9811-BAEF6ADEF3D3.html

2- Make sure it is plugged into a well-known outlet/power source

Best Regards

Fernando Vasquez

robinparky

SYST: amber
PWR: green
MS: off
UPDATE: off
DIAG: off
CLD: off

All lights on STATUS are off

Imran_ruckus

Hi robinparky

Thank you for the response and information you shared,

As you mentioned and we could see from the picture you shared that, there is an amber light on the "SYST" and a green light on the "PWR" in the section above the USB/ethernet ports. Meaning the Switch is stuck in the boot mode.

Basically, due to the power outage/ power spike, the switch went to a state that we call ‘boot mode’ that is not able to boot up properly.

Please follow to below steps in order to fix this issue:

Please try to disconnect from the Power outlet the ICX-7150 and reconnected.
Please try to press the reset button using a paper click or a small stick

Remove power from the switch.
Press and hold the Reset button while applying power to the switch.
After all the system LEDs flash amber, release the Reset button.

Below is the Guide and Videos link for your reference:

https://docs.commscope.com/bundle/icx7150-installguide/page/GUID-D3B5DB74-53A7-4F8D-82F9-6EB600879EE7.html

Video link: https://www.youtube.com/watch?v=6jHMTdo_hK4

If the reset does not make any difference, we need to perform a software recovery since it can be that the image flash is corrupted in basic words the unit is not able to boot up properly and need re-install the image to boot up properly.

We must get console access to the ICX-7150-C12P Switch as mentioned in the steps from the guide below:

How to console in the ICX-7150-C12P:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-console-in-the-ICX-7150-12c-using-a-Windows-Machine/td-p/46759

Below are the Guide and Video Link to perform the Software recovery process:

Please refer to the below guide and Video link:

https://community.ruckuswireless.com/t5/RUCKUS-Support-for-Lennar-Homes/How-to-perform-a-Software-recovery-on-an-ICX7150-switch/td-p/47483

Video Link: https://www.youtube.com/watch?v=Ql22blH_CGo

Please let me know if you have any queries in this regard.

Best regards,

Imran Sanadi

Lennar Home Community.